HSM CMN3000R User Manual download pdf (Page 13)

THE CONTINUOUS POWER COMPANY

Page 13

SPECIFICATIONS

ELECTRICAL

Input CMN3000R/CMN4000R

Voltage 120V +10%, -20% (without

Battery discharge)

Power Factor Corrected IAW MIL STD. 1399 Sec. 300

Frequency 45 to 65Hz

Current(Amps) @ 120VAC 21A/28A @ 100% Non-Linear

Output

Voltage

120VAC ± 3%

Frequency 50Hz / 60Hz (software select)

Line Sync (software select)

Current(Amps) 25A/33A @ 100% Non-Linear

Crest Factor Ratio

(Non-linear load and

less than 5% THD) Typical

@50% Load Up to 4.8:1

@75% Load Up to 3.2:1

@100% Load Up to 2.4:1

Total Harmonic Distortion (THD) 3% Typ; 5% Max.

(@100% Non-linear load)

Dynamic Response

±4% for 100% Step Load Change,

0.5 Millisecond Recovery Time

Overload 110% for 10 Minutes;

200% for 50 Milliseconds

Efficiency (UPS) 85-87% Typical

UPS Protection Input and Output Short Circuit;

Input and Output Overload;

Excessive Battery Discharge

ENVIRONMENTAL

Operating Temperature 0

o

C to 40

o

C

Humidity 0% to 95% Non-condensing

Altitude Sea Level to 10,000 Feet

Audible Noise 42 dBA at Five Feet

MECHANICAL

Input

CPC Type 3 Position Inlet

Connectors

Output (Qty.) Load 1 and Load 2 (3 each)

NEMA Type 5-20R

Cooling Low Velocity, Temperature

Controlled Reversible Forced

Air

Dimensions: HxWXD In. 5.25 x 19 x 23

Weight: Lbs. (Kg) 85 (38.8)

DESIGN

Standard Features Power Factor Corrected, Digital

Regenerative™ On-Line, Sinewave

Inverter Powers Load Continuously

Extended Brownout Protection

Designed for Non-linear Loads

Continuous Operation on

-25%,+12% Line

Automatic Bypass

RS232 Data Interface

Software Selectable Output

Frequency

AC Output Switch

Auxiliary Battery Connector

Rear Mounted Ground Stud

Optional SNMP Interface

Specifications UL 1778, CUL, FCC Class A,

IEEE 587/ANSI C62.41,

IEC 555 @ 120VAC

MTBF In Excess of 100,000 Hours

CONTROLS AND INDICATORS

Visual Indicators

Sequenced LEDs

Single LED

Battery Level, Load Level

AC Input, Inverter On, Load On

Summary Alarm, Alarm Silence,

Cold Start,

Front Panel Controls Power On, Cold Start

Alarm Silence, Battery Test

AC Output On/Off, Bypass

Audible Alarms Utility Interrupt, Inverter Failure

Overload, Low Battery

RS232 Data Interface (DB-9F) Full Interactive, Remote Computer

Monitoring and Control of UPS

Functions.

Compatible with Systems

Enhancement

TM

UPS Monitor &

Control Software

Open Collector (DB-9F) Allows Alarm Function Monitoring

Optional SNMP Interface

(RJ45 or BNC)

Allows Full Control and Monitoring

Over Network Connection.

Specifications subject to change without notice

1 2 ... 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments